|
|
|
|
|
|
Incubator, CO2, VWR 2300 MP by Sheldon
|
|
|
Model: 2300 MP
Ready to use. Powers Up.
|
|
|
|
|
|
|
|
|
|
Precision Scientific 66722 Dubnoff Metabolic Water Shaking Incubator
|
|
|
Typical applications include RIA, cell incubation, protein coagulation, tissue metabolism analysis, dialysis, and cholesterol studies.
- 14.5 Liter/ 3.8 gallon
- Chamber Dimensions 12 x15 3 1/2
- Exterior Dimensions 14 x 24 1/2 x 9 1/2
- Temperature Range 212 Fahrenheit
- Electrical 120V 50/60Hz 870W
|
|
|
|
|
|
|
|
|
|
VWR Model 1555 Incubator
|
Our Price: $4,250.00 Sale Price: $1,300.00 Savings: $2,950.00
|
|
|
VWR Model 1555 Incubator
|
|
|
|
|
|
|
|
|
|
VWR/ ShelLab Model 1370 GM Gravity Convection Oven
|
|
|
VWR/ShelLab Model 1370 GM Gravity Convection Oven
- Digital Timer and temperature readout
- Capacity: 5.0 cu. ft.
- Temperature Range: 40 C above ambient to 240 C
- Uniformity: +/- 1.5 C at 150 C
- Recovery: 6 min at 150 C
- Dimensions (Exterior): 32-1/2"W x 28"D x 36.25"H
- Dimensions (Interior): 23"W x 20"D x 18.5"H
- Electrical: 110-120 VAC, 13.0A
|
|
|
|
|
|
|
|
|
|
Lab-Line Model 3530 Refrigerated Incubator-Shaker (9 cu. ft.)
|
|
|
Includes:
- Shaking Platform (30x18in)
- Power Cord
- Key for locking controls
- Specifications:
- 240V, 60Hz, 7.0Amps, 1700Watts
- Speed Control
- Temperature Control
- 40 to 400 rpm
- 1in. orbit
- 5 to 60ºC temperature range
- ±1ºC temperature control
- ±1ºC temperature uniformity
- 9 cu.ft. chamber volume
- Chamber
dimensions: 34x22x21in.
- Exterior dimensions:
45x31x40in.
|
|
|
|
|
|
|
|
|
|
Forma Scientific Model 3110 CO2 Water Jacketed Incubator
|
|
|
Forma Scientific Model 3110 CO2 Water Jacketed Incubator
Condition: Very good. Fully functional. Tested and calibrated. Ready to go.
Guarantee: 15 day money back
Warranty: 30 day warranty
Includes:
- Forma 3110 incubator (single chamber)
- (4) Shelves
Specifications:
Chamber Material: Polished stainless-steel interior with coved corners
CO2 Concentration Range: 0 to 20%
CO2 Sensor Technology: TC
Oxygen Control: None
O2 Sensor Technology: None
Relative Humidity: Ambient to 95% at 37°C
Temperature Range: Ambient +5° to 55°C
Dimensions (W x D x H) Interior 21.3 x 20 x 26.8 in.
Dimensions (W x D x H) Exterior: 25 x 26 x 39 in.
Capacity: 6.5 cu.ft., 184L
Electrical Requirements: 115V 50/60Hz
Net Weight (English): 265 lb.
Shipping Weight: 324 lb.
Shelves 4/17: [Supplied/Max.]
Shelf size: 18.5 x 18.5 in.
Shelf Material Stainless-steel
Cabinet Material 18-gauge, cold-rolled steel
CO2 Concentration Control TC Sensor
Ports Chamber thru-wall access port with filter
|
|
|
|
|
|
|
|
|
|
Thermo Scientific MaxQ 7000 Digital Water Bath Shaker
|
|
|
- Temperature Range: 5 degree celsius above ambient to 65 celsius
- Temperature Accuracy: .02 degree celsius accuracy at 37 degree celsius in flask
- Motor: Triple eccentric drive
- Orbit: 0.5" (1.27cm)
- Platform L x W: 11" x 13" (27.9 x 33cm)
- Platform Load Capacity: 35 lbs (15.9 kg)
- Overall L x W x H: 25" x 21.5" x 18" (63.5 x 54.6 x 45.7cm)
- Interior Dimensions: 15" x 14" x 7"
- Shipping Weight: 107 lbs (48.5kg)
CALL FOR PRICING
|
|
|
|
|
|
|
|
|
|
Thermo Forma 3120 Series II Water Jacketed CO2 Incubator, 6.5 cu. ft.
|
|
|
Reconditioning process for incubators with HEPA filters includes the following: - Testing of liquid level sensor;
- Verification that the system reaches set-point using NIST [National Institute of Standards Technology] traceable ambient air probe. Calibration if needed;
- Connecting CO2 to incubator and Set-point to 5%;
- Verify CO2 percentage using NIST CO2 Traceable IR sensor;
- Installation of a New HEPA filter;
- Drain jacket;
- Clean exterior and interior.
|
|
|
|
|
|
|
|
|
|
Lab-Line Model 3530-2 Refrigerated Floor Model Incubator-Shaker (9 cu. ft.)
|
|
|
Model: 3530-2
Great Condition. Ready to use.
|
|
|
|
|
|
|
|
|
|
Adolf Kuhner ISF-1-W Incubator Shaker
|
|
|
Includes:
- Model: ISF-1-W Incubator Shaker
- Does not include CO2
- 110-220 Volt
|
|
|
|
