Scientific Asset Management, LLC

• Powers up.
• Model: TM40
• SN: 7964
• Volt: 120
• Watts: 40
• Hz: 50-60

• Sold as seen in pictures

1.7 mm Acid Washed Zirconium Beads are suitable for homogenizing larger tissue samples, fungi pellicles, and fine plant material. Comparable to Lysing Matrix Z.

Zirconium Beads are denser than silica beads, less expensive than stainless steel grinding balls and inert in most solutions. They are washed with acidified water to remove contaminants typically found in untreated beads (e.g., dust, microbes, hair), and further baked to remove any organic impurities.

Pre-Filled Tubes are a convenient solution for labs seeking time savings by no longer requiring researchers to weigh, fill and QC individual tubes. They are available in 2 mL skirted (i.e., self-standing) or unskirted polypropylene tubes to ensure compatibility with most tube homogenizers. Clear screw caps with O-rings included.

A great alternative to costly stainless steel and brittle silica, S.A.M.s' 3.0 mm Acid Washed Zirconium Beads are are chemically-resistant to organics and suitable for homogenizing larger tissue and plant leaf samples.

Beads are washed with acidified water to remove contaminants typically found in untreated beads (e.g., dust, microbes, hair), and further baked to remove any organic impurities.

Pre-Filled Tubes are a convenient solution for labs seeking time savings by no longer requiring researchers to weigh, fill and QC individual tubes. They are available in 2 mL skirted (i.e., self-standing) or unskirted polypropylene tubes to ensure compatibility with most tube homogenizers. Clear screw caps with O-rings included.

17 mm Acid Washed Zirconium Beads in a .5ml inserted 2ml tube are suitable for homogenizing larger tissue samples, fungi pellicles, and fine plant material. Comparable to Lysing Matrix Z.

Zirconium Beads are denser than silica beads, less expensive than stainless steel grinding balls and inert in most solutions. They are washed with acidified water to remove contaminants typically found in untreated beads (e.g., dust, microbes, hair), and further baked to remove any organic impurities.

Pre-Filled Tubes are a convenient solution for labs seeking time savings by no longer requiring researchers to weigh, fill and QC individual tubes. They are available in 2 mL skirted (i.e., self-standing) or unskirted polypropylene tubes to ensure compatibility with most tube homogenizers. Clear screw caps with O-rings included.

• Model: 125
• SN: 3.274287
• 3000-30,000 RPM
• 116 Volt
• 50/60Hz
• Powers Up. Working Condition
• We have a generator for sale as well for additional cost. Diameter: 5mm x 90mm long. Please contact us if you would like to add this to your purchase of the PowerGen.

The SONABOX reduces cavitational sound emitted during processing when using the Model 150VT or 300VT Ultrasonic Homogenizer.
Catalog Number: 0-120-0003

Harmonics are produced by the vessel walls and fluid surface that can be discomforting to the operator with extended operation. The SONABOX reduces the harmonics by approximately 20-25 dB.

The clear acrylic door permits viewing of the sample while protecting the operator against accidental splashing.

The rear access port is utilized for tubing and cabling when processing samples with the Cup Tip or Continuous Flow Chamber.

The height of the sample table can be adjusted to vessel size and shape.

• Model/Cat# 903475
• SN: F032048
• Speed 300-5000 RPM
• 120VAC, 50/60Hz, 50Watts