|
|
|
|
 |
KNF Neuberger Laboport Vacuum Pump & Controller Model NC800A
|
|

KNF Neuberger Laboport Vacuum Pump & Vacuum Controller Model NC800A
Vacuum Pump is operational and the Vacuum Controller powers on. No further testing has been done by our company. Has not been tested down to mBar.
This sale comes with one vacuum pump and one vacuum controller. The controller allows for a set point to be made and will switch off the pump once the selected target has been reached. If a second vacuum controller is added to the system then it becomes possible to simultaneously run two different and independent process with just one pump.
|
|
 |
|
|
|
|
 |
Thomas 905CA23TFE-217E Compressor Vacuum Pump 115v 60hz 2.5A
|
|

- Model: 905CA23TFE-217E
- SN: 109900001629
- Volt: 115
- Amps: 2.5
- Hz: 60
- 30 Day Warranty
|
|
 |
|
|
|
|
 |
CMA / 102 Microdialysis Pump
|
|

CMA / 102 Microdialysis Pump
Powers on. No further testing has been done by our company. Sold as seen in pictures.
CMA model CMA/102 Microdialysis Pump
- 0.1 to 20 ul/min
- 12V DC Power Supply is included
|
|
 |
|
|
|
|
 |
Gast Diaphram Vacuum Pump Model DOA-V141-AA
|
|

- Vacuubrand CVC II Controller: NOT INCLUDED. USED FOR DEMONSTRATION PURPOSES ONLY.
- Model: DOA-V141-AA
- SN: 0284
- Draws 194 mbar
- Volt: 115
- Amps: 4.0
- Hz: 60
- Dims: 11D x 5W x 9H
- Weight: 14 lbs
- Made in USA
- 30 Day Warranty
|
|
 |
|
|
|
|
 |
Masterflex Easy-Load II Model 77201-60 Peristaltic Pump Drive
|
|

Ready to use. Sold as seen in pictures
|
|
 |
|
|
|
|
 |
KD Scientific Model 210 Infusion Syringe Pump
|
|

This is sold as a parts unit. Doesn't pull correctly.Specifications:Max. No. of Syringes: Two
Syringe Size: 10 µl to 140 ml Dimensions: 11 x 9 x 5.5 in. 28 x 23 x 14 cm Weight: 9 lb (4 kg) Linear Force: 40 lb (18 kg) Advance Per Microstep: 0.165 micron (1/16 step) Max Step Rate (1/2 Step): 1600/sec Min Step Rate: 1
step / 100 sec.
Accuracy: ±0.1%
|
|
 |
|
|
|
|
 |
KNF Neuberger Diaphram Vacuum Pump Model UN726.1.2 FTP
|
|

Model: UN726.1.2 FTP SN: 1/1047446 45 Torr Reads 85 Torr Dims: 12D x 10W x 8H Weight: 15 lbs. Made in USA Fully Serviced. 30 Day Warranty.
Vacuubrand CVC II Controller: NOT INCLUDED. USED FOR DEMONSTRATION PURPOSES ONLY.
New diaphrams available and can be installed for additional $270.00
|
|
 |
|
|
|
|
 |
Harvard Apparatus Digital Dual Syringe Pump Model '22' Cat#55-2222
|
|

Harvard Apparatus Digital Dual Syringe Pump Model '22' Cat# 55-2222.
Powers up and works. 110v Power cord is included.
The Model is an Infusion Only syringe pump employing a microprocessor controlled
small step angle stepping motor driving a lead screw and half nut. A key pad is used
for data entry of flow rate and syringe diameter. The microprocessor calculates the
cross sectional area of the syringe to be used and calibrates the flow rate for that
syringe. A number of special features result from use of microprocessor technology.
If the user selects a combination of syringe size and flow rate that is outside the
range of the pump,(eg, 50 ml/min with a 10 microliter syringe) the pump will reject
this instruction and notify the user.
The pump remembers its last instructions, entered from the keyboard, including
diameter and flow rate even after the power has been disconnected.
An optical sensor detects lack of motion due to jamming, end of syringe travel, kinking
of tubing, etc.shuts down the pump and alerts the user.
The pump will stop and alert the user during a loss of power.
|
|
 |
|
|
|
|
 |
Harvard Apparatus Digital Dual Syringe Pump Model '22' Cat#55-2222
|
|

Harvard Apparatus Digital Dual Syringe Pump Model '22' Cat# 55-2222.
Powers up and works. 110v Power cord is included.
The Model is an Infusion Only syringe pump employing a microprocessor controlled
small step angle stepping motor driving a lead screw and half nut. A key pad is used
for data entry of flow rate and syringe diameter. The microprocessor calculates the
cross sectional area of the syringe to be used and calibrates the flow rate for that
syringe. A number of special features result from use of microprocessor technology.
If the user selects a combination of syringe size and flow rate that is outside the
range of the pump,(eg, 50 ml/min with a 10 microliter syringe) the pump will reject
this instruction and notify the user.
The pump remembers its last instructions, entered from the keyboard, including
diameter and flow rate even after the power has been disconnected.
An optical sensor detects lack of motion due to jamming, end of syringe travel, kinking
of tubing, etc.shuts down the pump and alerts the user.
The pump will stop and alert the user during a loss of power.
|
|
 |
|
|
|
|
 |
Harvard Apparatus Digital Dual Syringe Pump Model '22' Cat#55-2222
|
|

Harvard Apparatus Digital Dual Syringe Pump Model '22' Cat# 55-2222.
Powers up and works. 110v Power cord is included.
The Model is an Infusion Only syringe pump employing a microprocessor controlled
small step angle stepping motor driving a lead screw and half nut. A key pad is used
for data entry of flow rate and syringe diameter. The microprocessor calculates the
cross sectional area of the syringe to be used and calibrates the flow rate for that
syringe. A number of special features result from use of microprocessor technology.
If the user selects a combination of syringe size and flow rate that is outside the
range of the pump,(eg, 50 ml/min with a 10 microliter syringe) the pump will reject
this instruction and notify the user.
The pump remembers its last instructions, entered from the keyboard, including
diameter and flow rate even after the power has been disconnected.
An optical sensor detects lack of motion due to jamming, end of syringe travel, kinking
of tubing, etc.shuts down the pump and alerts the user.
The pump will stop and alert the user during a loss of power.
|
|
 |